Table of Contents
Advertisement
Pull up to release
RPS module
To remove a DES-7011 RPS module:
1. Grasp the unit by the handles on the front using both hands.
2. Release the catch by applying upward pressure on the catch release near the left side of the
unit.
3. Pull the RPS unit straight out from the chassis.
Inserting a DES-7011 RPS Module into the DES-7000 chassis
To insert an RPS module push the unit straight in toward the back of the chassis until the catch snaps
into place securely holding the RPS in position.
Unpacking and Setup
DES-7000/DES-7100 Layer 2 Switch User's Guide
RPS status
LED indicators
16
Advertisement
Table of Contents
