Table of Contents
Advertisement
10.1
MAINTENANCE
Transmitter
• Wipe the outside of the transmitter with a wrung-out, slightly water-dampened
cloth or isopropyl alcohol wipe between uses.
• Keep the transmitter clean and protected when not in use.
Receiver
• Do not spill fluid on the receiver or submerge the receiver in liquid.
• Keep the receiver in its carrying case or otherwise protected.
• Charge the receiver when the battery gets low.
• Keep the micro USB port cover closed to help prevent fluid from getting
inside the receiver.
Accessories
• Insert cables only as directed. Do not force cables in place.
• Observe cables for signs of wear and tear.
• Only use Dexcom-supplied parts (including cables and chargers). Use of non-
Dexcom supplied parts may affect safety and performance.
There is no repair service available for your Dexcom G4 CGM System. If you
experience problems with your system contact your local distributor.
Dexcom G4 User's Guide
|
113
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated