Table of Contents
Advertisement
2
c. Set the time and date. The date format is
YYYY/MM/DD.
• Press the
UP
or
DOWN
current date and time.
• Press the
RIGHT
button (show icon) to move to
the next section.
• Press the
SELECT
time and date.
d. Enter your transmitter ID.
• Press the
UP
or
DOWN
transmitter ID.
• Press the
SELECT
transmitter ID.
Your transmitter ID is unique and contains a code with 5 numbers and/or letters
and can be found in the following locations:
• On the outside of the transmitter box label.
• On the bottom of the transmitter.
HELPFUL HINTS:
• Write your transmitter ID number down in the Important Contacts and
Numbers list on page 4.
• If you need to change the language, time format, time, date or transmitter
ID after you have completed the Setup Wizard see Section 2.2, The
Settings Menu.
26
|
Dexcom G4 Continuous Glucose Monitoring System
button to enter the
button to confirm changes to
button to enter your
button to confirm entry of
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated