Table of Contents
Advertisement
1
1.4.2
CHARGING YOUR RECEIVER BATTERY FROM A
WINDOWS COMPATIBLE COMPUTER
The Dexcom Studio software must be installed to charge your receiver
from a computer.
1. Plug the included USB cable into your computer.
2. Plug other end of the USB cable into the receiver.
3. The battery charging screen will appear on the
receiver.
4. After a few seconds the trend graph will reappear
with the battery charging symbol shown in the
upper left corner.
HELPFUL HINT:
• Charge only from a USB port on your computer or the AC power
adapter. Do not use an external USB hub. An external USB hub may not
provide enough power to charge the receiver.
20
|
Dexcom G4 Continuous Glucose Monitoring System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated