Table of Contents
Advertisement
There are five receiver buttons to move you through the display screens that
control setup and operation and allow you to change your receiver settings. The
screens display sensor glucose readings, trend graphs and trend arrows.
Your receiver and transmitter are wirelessly paired together to communicate
securely and only with each other.
You will need a commercially available blood glucose meter to use with your
system.
UP button
LEFT
button
DOWN
button
RIGHT
button
SELECT button
Dexcom G4 User's Guide
|
17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated