Table of Contents
Advertisement
HELPFUL HINT:
• Alerts must be acknowledged by pressing the SELECT button on the
receiver.
6.2
ADVANCED ALERTS
In addition to your high and low alerts and alarm, the high and low snooze, rise
and fall rate and out of range alerts may be set. For any of these advanced
alerts follow the steps below.
1. Turn the receiver on by pressing the
2. Press the
SELECT
3. Press the
UP
or
DOWN
button.
4. From the alerts menu, press the
button to select "Advanced" and press the
button.
SELECT
button to enter the main menu.
button to highlight "Alerts" and press the
UP
or
DOWN
button.
SELECT
Dexcom G4 User's Guide
SELECT
|
73
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated