INDICATIONS FOR USE
The Dexcom G4 Continuous Glucose Monitoring System is a glucose-
monitoring device indicated for detecting trends and tracking patterns in
persons (age 18 and older) with diabetes. The system is intended for use by
patients at home and in healthcare facilities and requires a prescription (United
States).
The Dexcom G4 System is indicated for use as an adjunctive device to
complement, not replace, information obtained from standard home glucose
monitoring devices.
The Dexcom G4 System aids in the detection of episodes of hyperglycemia
and hypoglycemia, facilitating both acute and long-term therapy adjustments,
which may minimize these excursions. Interpretation of the Dexcom G4 System
results should be based on the trends and patterns seen with several sequential
readings over time.
IMPORTANT USER INFORMATION
Please review your product instructions before using your continuous glucose
monitoring system. Contraindications, warnings, precautions, cautions, and
other important user information can be found in your product instructions.
Discuss with your healthcare professional how you should use your sensor
trend information to help manage your diabetes. Your product instructions
contain important information on troubleshooting your system and on the
performance characteristics of the device.
CONTRAINDICATIONS
• The Dexcom G4 Sensor, Transmitter, and Receiver must be removed prior
to Magnetic Resonance Imaging (MRI), CT scan, or diathermy treatment.
The Dexcom G4 System has not been tested during MRI or CT scans or with
diathermy treatment, and it is unknown if there are safety or performance
issues.
• Taking acetaminophen (paracetamol) containing products (such as Tylenol)
while wearing the sensor may falsely raise your sensor glucose readings. The
level of inaccuracy depends on the amount of acetaminophen (paracetamol)
active in your body.
Dexcom G4 User's Guide
|
7
Need help?
Do you have a question about the g4 and is the answer not in the manual?
Questions and answers
The mom set a high ceiling of 300. How do I get to an actual number and not a "high" reading
You can adjust the high glucose alert value on the Dexcom G4 by following these steps:
1. Press the button to select “High Alert.”
2. Press the UP or DOWN button to highlight “On/Off” and press the SELECT button to set this option.
3. Press the LEFT button to return to the previous screen.
4. Press the DOWN button to highlight “Level.”
5. Press the SELECT button and then use the UP or DOWN button to adjust the high glucose alert value.
6. The high glucose alert value can be set between 6.7 and 22.2 mmol/L in 0.1 mmol/L increments.
7. Press the SELECT button to confirm the new setting.
This adjustment allows you to set a specific threshold instead of receiving a general "high" reading.
This answer is automatically generated