Section 1: Deploying Your Lifesize Icon Video System - LifeSize Icon 600 System Manual

Section 1: Deploying Your LifeSize Icon Video
System
At installation, configure your video system by opening a web browser and navigating to the system IP
address that appears in
NOTE
Read more about configuration preferences in the online help available when
you access your video system from a browser.
•
Manage administrator passwords. Read more at
•
Configure your video system for firewall traversal. Read more at
•
Set the location and time zone.
•
Define the system name.
•
From your video system's display, select
•
Select the language for onscreen text. You can also select
video system's display.
•
By default, DHCP is enabled on LifeSize systems. If you disable DHCP, you must specify the system's
IP address, subnet mask, and default gateway.
•
If you are using H.323 gatekeepers in your environment and want to place calls using a name or
extension with the H.323 protocol, configure your LifeSize system to use H.323.
•
If you are using Session Initiation Protocol (SIP) servers, configure your LifeSize system to use SIP.
•
Configure call, audio, and video preferences.
•
Integrate your LifeSize video system with LifeSize Bridge, LifeSize UVC Manager, LifeSize UVC Video
Center, or LifeSize UVC Transit. Read more at
on the main screen of the video system's display.
>
Configuring
System Access and Passwords.
Configuring Your
to set the safe area.
> to select a language from your
Integrations.
LifeSize Icon Video System Guide
Firewall.
3