Message; Voicemail - TIPTEL 282 Manual

Enterprise IP Phone
dialing interface and invite another party to participate in teleconference.
5) After starting conference, press Hold key to Hold local call without influencing
others in conference.

Message

The phone supports SMS (Short Messaging Service) and Voicemail, if you want to use
them, please make sure that your VoIP telephony system supports this functionalities
and your accounts' message has been enabled.

Voicemail

Your voice mailbox messages, which are usually stored on a media server of your local
or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described below:
The idle screen will indicate the new voice messages coming:
The MESSAGE button will be lighted.
To configure the Voicemail code via Phone interface:
1) Press Menu->Messages->Voice Mail->Set Voice Mail .
2) Use the navigation keys to highlight the line for which you want to set, enter the
code which the phone uses to connect to your system. Press 123 hot key to choose
the proper input method.
3) Press Save to save the change, press Back to return to the previous menu.
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
To view the new voicemail via the Phone interface:
1) Press Menu->Messages->Voice Mail->View Voice Mail.
2) Choose the account and press the Connect button, then you are able to listen to
your new and old messages.
To retrieve the new voicemail via the Phone interface:
1) Press the Voicemail hot key directly.
2) You may be prompted to enter the password which is needed to connect to your
VoIP telephony system. It depends on your system.
3) Your voice mailbox is called and you are able to listen to your new and old
messages.
Note:
Before retrieving the new voicemail, please make sure that the connecting code has
been set on the phone.
Using the Basic Call Functions
- 41 -