Dictate/Call Record; Message Transfer; Message Collection - TIPTEL 290 ISDN Operating Instructions Manual

Table of Contents

Advertisement

Answering machine (only tiptel 291/293)

Dictate/Call record

You can use your answering machine to dictate personal information directly. If you speak your
information while the answering mode is on, other persons can retrieve this information via a remo-
te interrogation function. In this way, your answering machine can serve as an electronic mailbox.
Press the  or  button to select
1.
"dictate/call record".
Press the  button.
2.
Press the  button.
3.

Message transfer

In the answering mode with message transfer on, your tiptel 291/293 dials a pre-programmed
destination number after an incoming message has been recorded. If the destination number is
busy, the device will redial the number up to four times every 60 seconds. If the called party does
not answer the call within 50 seconds, the dialling procedure is interrupted. If you have dialled
"#" after the target number, this time is reduced to 1 second. When the handset of the program-
med target number is picked up, the following pre-programmed announcement is heard:
"Automatic call, subscriber (own telephone number), X messages, please perform a remote
interrogation. I repeat ...".
If a remote interrogation is not performed within 20 minutes, the answering machine will call the
destination number again as a reminder (two times).

Message collection

If you want to collect several messages before executing the message transfer function, you
simply have to determine the number of incoming messages after which the message transfer
shall start (see chapter "Message transfer settings").
Every time you press the button, the display
switches between the available functions.
The display shows "recording". Now, start to
speak your information.
The recording is stopped. The LED blinks.
56

Advertisement

Table of Contents
loading

Table of Contents