Decryption - TIPTEL 282 Manual

Enterprise IP Phone
Set Auto Provision via phone interface:
1) Go to Menu->Settings->Advanced Settings-> Auto Provision.
2) Enter the URL, User Name and Password.
3) Click the Save hot key to save the changes.
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
be only conducted in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the Speaker
key for 3 seconds, the IP phone will enter the account configuration interface. Users
can reconfigure the IP phone account information here, and then press the OK
button to save the changes.
3. The upgrade priority is PNP, Custom Option, URL by descending.
4. Users can also delete some configuration options by Auto-provision, for example,
to delete the admin password.

Decryption

This IP phone can support y000000000005.cfg and mac.cfg files encryption and
decryption for user authentication to realize
y000000000005.cfg or mac.cfg files on the server, users can open the webpage of your
IP phone. Go to Upgrade->Advanced, choose and fill in the Specified AES Key (for
y000000000005.cfg, should be 16 bit) and Per-phone AES Key (for mac.cfg, should be
16 bit) option, then click the Confirm button to decryption the files and upgrade to the
new version. Shown as below:
ecurity usage. If there are any encrypted
s
- 51 -
Trouble Shooting