Record; Hot Desking; Ldap - TIPTEL 282 Manual

Enterprise IP Phone

Record

Call recording is a phone function to record the conversation in the process of dialogue.
Using this feature, please pay attention to the maximum recording time and frequency
in advance. Generally, it maybe a few minutes.
To assign the key as Record:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Record option from
the list.
2) Press Confirm button to save the changes.

Hot Desking

Hot desking is regularly used in places where not all the employees are in the office at
the same time, or not in the office for very long at all, which means actual personal
offices would be often vacant, consuming valuable space and resources.
Hot desking is a phone feature that allows accounts to login or logout in an IP phone.
After a certain account landing, the corresponding configuration of the account will be
applied to the phone.
This IP phone can support two kinds of Hot desking: Base Mode and Advanced Mode.
Base Mode: Pressing the DSS key which is set to be Hot Desking when the phone is
idle to active the Base Mode. By this mode, it will clear all of the account records, then
set up an account and register for the first account.
Advanced Mode: By this mode, it will clear the first account information, then
connect the URL to download the Xml file and configure a new account.
To assign the key as Hot Desking:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Hot Desking option
from the list.
2) In the "Value" field, enter the URL address in the input field to active the advanced
mode. Or you can leave it black to active the base mode.
3) Press Confirm button to save the changes.

LDAP

If you want to use the LDAP function, you must configure the corresponding options in
the LDAP interface at first.
To assign the key as LDAP:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose LDAP from the list.
- 63 -
Trouble Shooting