Message; Voicemail - TIPTEL IP 284 Manual

Enterprise IP Phone
to end the private chat, press ExitPri hot key.
6) Initiator can use remove function to remove any CONF members, press remove hot
key, choose any members in phone member list , and then press remove hot key
again.
7) Initiator Hangs up, the CONF over.

Message

The phone supports SMS (Short Messaging Service) and Voicemail, if you want to use
them, please make sure that your VoIP telephone system supports this functionalities
and your accounts' message has been enabled.

Voicemail

Your voice mailbox messages, which are usually stored on a media server of your local
or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described below:
The idle screen will indicate the new voice messages coming:

The MESSAGE button will be lighted.

To configure the Voicemail code via Phone interface:
1) Press Menu->Messages->Voice Mail->Set Voice Mail.
2) Use the navigation keys to highlight the line for which you want to set, enter the
code which the phone uses to connect to your system. Press 123 hot key to choose
the proper input method.
3) Press Save to save the change, press Back to return to the previous menu.
Note:
Please contact your system administrator for the connecting code. Different systems
have different codes.
Want to see amount of Voice mail via phone interface, must enable the Subscribe for
MWI via the web interface at first.
1) Choose Account->Advanced-> Subscribe for MWI.
Choose enable in the pull-down menu.
2)
Using the Basic Call Functions
- 63 -