Enterprise IP Phone
and phone user interface. The administrator/user password is used to access:
Web interface.
the advanced settings of the phone such as Network, Account, Reset to Factory
Settings via the Phone interface.
The default administrator password is admin. Meanwhile the user name for Web
interface access is admin.
To change the administrator password via phone interface:
1) Press the Menu ->Settings-> Advanced Settings.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Set admin Password, press Enter hot key.
4) You are prompted to enter the old and new password, Press abc hot key to change
the input method.
5) Press Save hot key to confirm the change, or Back hot key to return to the previous
menu.
To change the administrator password via web interface:
Choose Security, enter the old, new password and Confirm Password, choose Confirm
button to save the changes, or Cancel button to cancel the changes.
To logout via Web interface:
Choose Security->Password, click the Logout button.
Reboot
You should reboot the phone when you are challenged, e.g. after applying changes to
the phone configuration.
To reboot via Web interface:
1) Choose Upgrade->Basic.
2) Click Reboot button.
Note:
Please do not power off during reboot, or it will cause the flash memory error.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider's advice.
To reset to factory via phone interface:
1) Press the Menu->Settings->Advanced Settings->Enter.
2) You are prompted to enter the required password, the default one is admin.
3) Scroll to Reset to factory option, and press Enter hot key to enter the configuration
- 49 -
Trouble Shooting