Vlan Setting - TIPTEL 282 Manual

Enterprise IP Phone
WAN setting information. The following table lists the instructions of the field about the
Network PC Port Setting.
Field Name
As Bridge
As Router
IP address
DHCP Server
Start IP Address
End IP Address
To configure PC Port settings via Phone interface:
1) Press Menu->Settings->Advanced Settings.
2) Enter the password required, scroll to Network option, then press Enter hot key,
select PC port and press Enter hot key.
3) If you choose Bridge, it will return to the previous menu.
4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,
DHCP Server Disable/Enable.
5) Press Save hot key to save the changes, or Cancel hot key to return to the previous
menu.
To configure PC Port settings via Web interface:
Choose Network-> PC Port to do the relating configuration. You can consult your system
administrator for more information.

VLAN Setting

VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location. The
following table lists the instruction of the field about the VLAN Setting.
Field Name
When the network capacity is insufficient, QoS could provide priority
QoS
to users by setting the value.
Define the port for voice transmission.
Local RTP Port
If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
If you select the Router mode, the SIP phone will work as a router.
User could configure the PC port IP address.
If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the DHCP
server can not work.
Indicate the range of the IP address.
Indicate the range of the IP address.
Description
Description
- 46 -
Trouble Shooting