Call Park; Group Listening; Sms - TIPTEL 282 Manual

Enterprise IP Phone

Call Park

Call Park is a feature that allows a person to put a call on hold at one telephone set and
continue the conversation from any other telephone set.
The "call park" feature is activated by pressing a preprogrammed button or a special
sequence of buttons. When the conversation which is monitored was transferred to an
unused extension number, you can press this key to retrieve the call.
To assign the key as Call Park:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Call Park from the
list.
2) Enter the number you want to park in the Value field.
3) In the "Line" field, select a line for which to apply this key.
4) Press Confirm button to save the changes.

Group Listening

When the key is configured as Group Listening key, you are allowed to enable the
Speakerphone and Handset/Headset mode at the same time. It is suitable for the group
conversation which has more than one person at one side. You are able to speak and
listen using handset/headset; meanwhile the others nearby can listen using
speakerphone. You can get back to the previous mode by pressing the key again. (If the
current mode is handset or headset, users can press the speaker button to open or
close the group listening function)
To assign the key as Group Listening:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, and choose Group
Listening from the list.
2) Press Confirm button to save the changes.

SMS

When the key is configured as SMS key you are allowed to access SMS quickly by
pressing this key.
To assign the key as SMS:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose SMS from the list.
2) Press Confirm button to save the changes.
- 60 -
Trouble Shooting