Redial; Call Return; Pick Up - TIPTEL 282 Manual

Enterprise IP Phone
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose DND from the list.
2) Press Confirm button to save the changes.

Redial

If the key is configured as Redial key, press this key under the idle status, it will enter
the Dialed Calls interface, then you can choose a special line to call out by pressing the
line keys.
To assign the key as Redial:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Redial from the
list.
2) Press Confirm button to save the changes.

Call Return

When the key is configured as Call Return key you are allowed to dial out the last phone
call you received.
To assign the key as Call Return:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Call Return from
the list.
2) Press Confirm button to save the changes.

Pick Up

When you configure a Pick Up key, you specify the extension that you want to monitor.
Then, when the monitored extension receives a call, you can press this key to pick up
the incoming calls.
To assign the key as Pick Up:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Pick Up option
from the list.
2) Enter the feature code (for example, input *78345, *78 is the feature code and the
345 is the extension number you want to pickup) in the Value field.
3) In the "Line" field, select a line for which to apply this key.
4) Press Confirm button to save the changes.
- 59 -
Trouble Shooting