Table of Contents
Advertisement
Enterprise IP Phone
Forward
If the key is configured as Forward key, press this key under the idle status, the IP
phone will turn to the forward page, and you can set the Forward to number, then when
there is any call to the extension number will be forwarded to the set number
automatically.
To assign the key as Forward:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Forward from the
list.
2) Enter the extension number you want to forward to in the Extension field.
3) Press Confirm button to save the changes.
Transfer
You
are
able
to
Blind/Attended/Semi-Attended Transfer.
To assign the key as Transfer:
1) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Transfer from the
list.
2) Enter the Number in the "Value" field, when you are on an conversation, press this
key, the phone will Blind transfer to the number. Or you can leave it black to set as
the transfer button.
3) Press Confirm button to save the changes.
Hold
The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold:
6) Choose Phone->DSS Key-> Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Hold from the list.
7) Press Confirm button to save the changes.
DND
If the key is configured as DND key, you are allowed to active the DND function
immediately when you press it. Press it again to deactivate DND mode.
To assign the key as DND:
configure
the
key
as
a
transfer
- 58 -
Trouble Shooting
key
to
perform
the
Advertisement
Table of Contents
