Digital Electronics Pro-face GP-377 Series User Manual page 92

n n n n n OBJ. PLC HAS NOT BEEN SETUP
The host PLC setup in the Editor program (i.e. the .prw file) does not match the
PLC in use. Use the Error Code that follows the error message to select the proper
PLC type and correct the GP's INITIALIZE setup data so that it matches this.
6-20
Chapter 6 - GP RUN Mode and Errors
OBJ. PLC HAS NOT BEEN SETUP ( x x )
The PLC number (Hexadecimal)
written to the GP's System File
GP-377 Series Users Manual