2-Port Feature Overview - Digital Electronics Pro-face GP-377 Series User Manual

1.4

2-Port Feature Overview

You can now use Mitsubishi's GPP software (ladder programming software) on
your PC while you connect the Mitsubishi PLC to the GP and the GP to your PC.
You can send ladder logic data to and from the PLC, via the GP's Internal 2 port-
feature.With the GP377 Series unit, you can use the 2-Port feature by simply
connecting the GP and your PC via the data transfer cable (GPW-CB02) without
using the external 2-Port Adapter.
For information about PLC types and GP compatibility with GP-377 Series units,
refer to
cluded with the GP screen creation software)
n n n n n
When Using GP-377 Series unit's Internal 2-Port feature
Connected to the Serial I/F via
the Programmer I/F Cable
Connect to Programmer Port
Mitsubishi PLC
( c o m p a t i b l e
types only)
n n n n n When Using the External 2-Port Adapter Cable
Connect to Programmer Port
Mitsubishi PLC
( c o m p a t i b l e
types only)
*1 The Device Monitor feature can also be used at the same time. For details about the device
monitor function, refer to
tion Manual (included with the GP screen creation software)
*2 GP-377 Series units can also use the 2-Port Adapter II.
1-6
GP-PRO/PBIII for Windows PLC Connection Manual (in-
GP
Connect to the tool connector via Data
Transfer Cable (GPW-CB02)
GP
Connected to GP's Serial I/F
Digital's 2-Port Adapter II (GP070-MD11)
PC with Mitsubishi's GPP software installed, or
a Programming Console
GP-PRO/PBIII for Windows PLC Connec-
Chapter 1 - Introduction
PC with Mitsubishi's GPP soft-
ware installed
*2
or
GP-377 Series User Guide
*1