System Area Setup - Digital Electronics Pro-face GP-377 Series User Manual

Chapter 5 - Initializing the GP
DATA TYPE OF SCREEN NO.
This setup controls whether BIN or BCD format numbers are used when making
screen changes. Screen numbers 1~8999 are available when set up in binary
format; screen numbers 1~1999 are available when set up in BCD format.

5.3.2 SYSTEM AREA SETUP

Here you can designate the settings for the System Data Area. The System Data
Area is allocated in the PLC's internal memory, and is used for controlling the GP.
Devices that can be set in this area will differ depending on the PLC type.
When using the Memory Link format, this setting is unnecessary.
Press the item, and when the item is highlighted, it has been selected.
u u u u u System Area Size
This field displays the total number of words used for the items selected from the
SYSTEM AREA SETUP (Write and Read ).
When you press the Confirm key, the SYSTEM AREA CONTENTS screen
appears to confirm the selected items.
• The setup shown is enabled only when using the Direct Access format.
• The selected System Area items, as displayed on the screen, become the System
Data Area.
5-4
PLC Connection Manual (included with the screen creation software)
GP-377 Series Users Manual