Transferring Screen Data - Digital Electronics Pro-face GP-377 Series User Manual

4.5

Transferring Screen Data

This section describes the process required to transfer screen data to the GP, and to
receive data from the GP.
Connect the Data Transfer cable to the GP's tool connector, located on the side
face of the GP, and to the PC's serial port.
Desktop or
notebook
PC
Tool Connector
When sending the Project file to the GP, the Data Transfer cable (GPW-
CB02
Also, please note that an I/F conversion adaptor is not included with
the GP. If this adaptor is necessary, it can be purchased at a computer
supply store.
When using a serial mouse, be sure to use a different serial port for the data transfer
cable.
4-8
To PC's serial port
GP-377 unit (Side view)
sold separately) is needed.
-
Chapter 4 - Installation and Wiring
Data Transfer Cable
To GP's tool connector
GP-377 Series Users Manual
GP