Digital Electronics Pro-face GP-377 Series User Manual page 86

SCREEN MEMORY
DATA IS CORRUPT
(nnnn:mmmm)
CLOCK SETUP
*1
ERROR
SCREEN TRANSFER
ERROR
SCREEN TAG LIMIT
EXCEEDED
OBJ. PLC HAS NOT
BEEN SETUP (**)
6-14
Chapter 6 - GP RUN Mode and Errors
ScreenData is corrupted:
*nnnn indicates the Screen Number that
has an error.
*mmmm indicates the number of screens
that have errors.(Decimal)
The backup battery for the internal clock is
running low.
An error occurred in the data transmission
from the screen editor to the GPpanel.
Tags are setup beyond the tag limit (max. of
385.)
The host PLC set up in the Editor program
does not match the PLC in use.
Check the screens that have
errors, correct all errors, and
then transfer the screen data
again.
6.4.2 Error Message Details
Re-transfer the screen data.
6.4.2 Error Message Details
6.4.2 Error Message Details
GP-377 Series Users Manual