Display Setup - Digital Electronics Pro-face GP-377 Series User Manual

Chapter 5 - Installation and Wiring

5.4.4 DISPLAY SETUP

The GP's screen may flicker, or there may be shadows appearing on extended
display lines on the LCD surface. In the case where the GP's ambient temperature
becomes high, and its current brightness level is set to low, this effect may be
more pronounced. This phenomenon is however, a common attribute of LCDs and
is not a defect. To solve this, use this setting for adjusting the GP's brightness.
When Using GP-377L
When Using GP-377S
Current Value
To solve the above problem, touch "+" or "-" to adjust the brightness. You can
check the actual brightness in the preview field at the bottom of the screen. From
the default value of "0" there are 18 "+" levels and 2 "-" levels available.
Set Default Value
If you touch "Default", the setting returns to "0".
GP-377 Series Users Manual 5-15