Digital Electronics Pro-face GP-377 Series User Manual page 47

Chapter 4 - Installation and Wiring
Also, please remember that OFFLINE mode is unavailable in a completely new
GP until the necessary Screen Data has been transfered from the screen editor
software.
Therefore, be sure the GP's power cord is plugged in and no images are displayed
on the GP screen. While screen data is being sent from your PC to the GP, the
necessary System Data will be sent together with it.
n n n n n To send screen data to a GP that is currently in OFFLINE
mode:
1) From the OFFLINE mode's MAIN MENU, touch the TRANSFER
SCREEN DATA item on the screen to enter the TRANSFER SCREEN
DATA mode. This will allow the GP to receive data.
2)While data is being transferred, the messages "SETUP Transfer" and
"TRANSFERRING/PLEASE WAIT" will display. When data transfer is
completed, these messages will be cleared. If desired, use the GP's Editor
Software to stop the transfer.
If the Setup
MAIN MENU when data transfer is completed, if the Setup is not per-
formed, the GP will go ONLINE mode and the screen designated in the
"INITIALIZE / INITIALIZE SCREEN" setting will display.
When you transfer the information contained in the GP-PRO/PBIII for
Windows 's GP System settings to the GP, all OFFLINE MODE [ INI-
TIALIZE ] setting data in the unit will be lost.
*1 Setup means to download the GP's system program and a PLC protocol driver from the
screen editor software, in order to run the GP in a desired environment.
GP-377 Series Users Manual
GP-PRO/PBIII for Windows Operation Manual (included with the
screen creation software)
is performed, the screen will return to the OFFLINE mode's
*1
4-9