Communication Setup - Digital Electronics Pro-face GP-377 Series User Manual

Chapter 5 - Installation and Wiring

5.4.2 COMMUNICATION SETUP

RECEIVE TIMEOUT
Sets the value used for the data reception timeout (PLC - GP).
If the cable is not connected, data communication will Timeout in one second,
regardless of this setting's value. The default is "10" seconds.
If you transfer screens when a PLC communication error has occurred and the error
is not yet cleared, and the RECEIVE TIMEOUT value is set to 30 seconds or more,
an error message may appear on your personal computer.
RETRY COUNT
Designates how many times the GP tries to send data to the PLC when a PLC
communication error occurrs. An Error Message will appear on the GP after the
GP tries to send data to the PLC the number of times set by this option. The
default is "2".
GP-377 Series Users Manual 5-11