3.3
GP Tool Connector
The GP's Data Transfer Cable, Memory Loader, or the Bar Code Reader can
be attached to the GP's side face Tool Connector.
• Before unplugging any connector(s) from the GP, be sure the
• Do not connect or disconnect any equipment to or from the
• When the Bar Code Reader uses a separate power supply:
GP-377 Series Users Manual
GP Side view
GP's power cord is unplugged from the main power supply.
GP's Tool Connector while the GP's Power cord is connected.
- Turn the Bar Code Reader ON before turning the GP ON.
- Turn the GP OFF before turning the Bar Code Reader OFF.
Tool Connector
3-6