Offline Mode Main Menu - Digital Electronics Pro-face GP-377 Series User Manual

Chapter 4 - Installation and Wiring
4.2

OFFLINE Mode Main Menu

Each menu item shown below has different settings that must be set to match the
corresponding PLC in order for the GP to communicate properly.
Entering OFFLINE mode calls up the following screen.
Select the desired menu item by touching the corresponding item bar on the screen
selection.
Each Main Menu item is used as follows.
INITIALIZE
The setup items listed in this menu are necessary to run the GP unit.
TRANSFER SCREEN DATA
Select to transfer screen data to and from the screen editing software.
SELF-DIAGNOSIS
Checks to see if there are any problems with the GP System or Interface (I/F).
RUN
Starts GP operation.
GP-377 Series Users Manual
For more information about INITIALIZE, refer to Chapter 5, "Initial-
ization"; for more information about TRANSFER SCREEN DATA, refer
to GP-PRO/PBIII for Windows Operation Manual (included with the
screen creation software); for more information about SELF-DIAGNO-
SIS and RUN, refer to Chapter 6, "GP Run Mode and Errors".
4-3