Accessories - Digital Electronics Pro-face GP-377 Series User Manual

1.3

Accessories

All optional equipment listed below is produced by Digital.
n n n n n Available Software
Product Name
GP-PRO/PB III for
Windows Ver.4.0
or later
n n n n n Tool Connector
Product Name
Screen Data
Transfer Cable
Memory Loader II
n n n n n Serial Interface
Product Name
RS-232C cable
RS-422 cable
RS-422 cable
Connector terminal
block conversion
2 Port Adapter II
2 Port Adapter II Cable
Mitsubishi A Series
Programming Port I/F
cable
Mitsubishi FX Series
Programming Port I/F
cable
*1 For detailed information about range of connectable PLCs.
1-4
Model No.
GPW-PB01M-V40 <CD-ROM> Software to be used to create the GP's
Model No.
GPW-CB02
GP070-LD01-O
Model No.
*1 GP410-IS00-O
*1 GP230-IS11-O
GP230-IS12-O(for Multi-
link)
GP070-CN10-O
GP070-MD11
GP070-MDCB11
GP430-IP10-O
GP430-IP11-O
GP-PRO/PBIII for Windows PLC Connection Manual (included
with the screen creation software)
Chapter 1 - Introduction
Description
screen data using a personal computer.
Description
Connects the GP to a personal computer.
Transfers screen data and user
program(s).
Copies data (system and screen data) from
one GP to another GP. Rev. H or later
Description
Interface cable between the host (PLC)
and GP.
Conversion adapter to convert serial data
to RS-422 format.
Interface unit that allows use of both GP
and Mitsubishi A,Q, C and FX series
equipment in the same location.
Connects the GP to 2 Port Adapter II.
Connects directly to Mitsubishi's PLC I/F
Programming Console. Simultaneous
use of program console, however, is not
possible.
GP-377 Series User Guide