Set Up Touch Panel - Digital Electronics Pro-face GP-377 Series User Manual

5.4.3 SET UP TOUCH PANEL

Touch operation and Force Reset setup, and Display Device adjustments are made
here. There may be diffrences on these settings depending of the GP type.
GP-377L Setup Screen
GP-377S Setup Screen
TOUCH OPERATION MODE
Designates either One Point, Two Point or No Slide. When No Slide is selected,
dragging one's finger across the touch screen will elicit no screen response, and
only individually selected points will register.
SYSTEM RESET MODE
Designates whether or not a SYSTEM RESET operation is performed.
u u u u u Steps to run SYSTEM RESET
While holding down the bottom right corner (1) of the screen, press the upper
right corner (2). At the same time, press the bottom left corner (3) to enter the
FORCE RESET Operation. To activate Reset, press the RESET button, to trans-
fer to OFFLINE Mode, press OFFLINE.
! ! ! ! !
5-12
Chapter 5 - Installation and Wiring
GP-377 Series Users Manual