Digital Electronics Pro-face GP-377 Series User Manual page 43

Chapter 4 - Installation and Wiring
n n n n n After All Setting Data is Entered
Touch the top-right [SET] button.
If you wish to exit the screen without saving the changes, touch the CANCEL
button.
n n n n n Return To Previous Screen
Touch the title of the screen you would like to return to.
E.g. To return to the MAIN MENU from the SYS.ENVIRONMENT screen,
simply touch the MAIN MENU title.
GP-377 Series Users Manual
• Press the [SET] key to write the Setup
conditions onto the Internal FEPROM,
which may take some time, causing a
delay in returning to the previous
screen. Therefore, do not touch the
screen until the previous menu display
returns.
• Press the [SET] key to write the Setup
conditions onto the Internal FEPROM,
and Press the [CANCEL] key to not
write the Setup conditions onto the
Internal FEPROM and return to the
previous menu.
4-5