Chapter 4 Offline Mode; Entering Offline Mode; When Turning The Gp's Power On - Digital Electronics Pro-face GP-377 Series User Manual

Chapter
4 OFFLINE Mode
OFFLINE Mode provides access to the Initialize, Self-Diagnosis, and other
features built into the GP. You will need to change the GP to OFFLINE mode
before you can use any of these features.
OFFLINE mode is unavailable in a completely new GP until the neces-
sary Screen Data has been transfered from the screen editor software.
Be sure the GP's power cord is plugged in and no images are displayed
on the GP screen. When data is transferred from your PC to the GP, the
necessary System Data will be sent.
4.1

Entering OFFLINE Mode

To INITIALIZE the setup or run SELF-DIAGNOSIS in the GP unit, transferring
to the OFFLINE mode becomes necessary. There are two ways to enter OFFLINE
mode. First, immediately after plugging in the GP's power cord, and second, by
using the Force Reset feature.

4.1.1 When Turning the GP's Power ON

Touch the upper left-hand corner of the GP screen within 10 seconds of plugging
in the GP's power cord.
1. Entering OFFLINE Mode
2. OFFLINE Mode's Main Menu
3. INITIALIZATION
For information about transferring data to the GP, refer to GP-PRO/
PBIII for Windows Operation Manual (included with the screen cre-
ation software)
4. SELF-DIAGNOSIS
5. Transferring Screen Data
Protocol Name
Current Date/Time
Protocol Version