Touch Panel Does Not Respond - Digital Electronics Pro-face GP-377 Series User Manual

Chapter 6 - GP RUN Mode and Errors

6.2.4 Touch Panel Does Not Respond

When the touch panel does not respond, or its response time is very slow after it is
pressed, please use the flowchart below to find the origin of the problem, and the
appropriate solution.
Touch panel not responding
Is INITIALIZE's SET
UP TOUCH PANEL
Disconnect all the cables (includ-
ing SIO cable and AUX cable), ex-
cept the Power cable.
Run SELF-DIAGNO-
SIS/ TOUCH PANEL
CHECK to see the GP
There is a problem with the
GP unit. Please contact your
local GP distributor.
GP-377 Series Users Manual
correct?
YES
is OK
NO
In the INITIALIZE/ SET UP
TOUCH PANEL option, enter val-
ues applicable to the Touch Opera-
NO
tion Mode.
ing the GP"
Are the settings for
YES
touch input tags, or for
Parts correct?
YES
Connect each piece of peripheral
equipment (i.e. Transfer Cable,
Barcode Reader, etc.) to the GP
and then turn it ON to check if the
Touch Panel operates correctly.
NO Peripheral equip-
ment is malfunc-
tioning.
Chapter 5 "Initializ-
NO
Set the addresses
within the allow-
able range,or re-
define the touch
area.
The error may be caused
by peripheral equipment.
YES
6-9