Digital Electronics Pro-face GP-377 Series User Manual page 6

GP Wiring
• To prevent an electric shock, be sure to confirm that the
GP's power cord is not connected to the main power
when connecting any cords, cables or lines to the GP.
• Do not use power beyond the GP's specified voltage
range. Doing so may cause a fire or an electric shock.
GP Start-up and Maintenance
• The GP uses a lithium battery for backing up its internal
clock data. If the battery is incorrectly replaced, the bat-
tery may explode. To prevent this, please do not replace
the battery yourself. When the battery needs to be re-
placed, please contact your local GP distributor.
GP Installation
• High voltage runs through the GP. Except for replacing
the backlight, never disassemble the GP, otherwise an
electric shock can occur.
• Do not modify the GP unit. Doing so may cause a fire or
an electric shock.
• Do not use the GP in an environment where flammable
gasses are present, since operating the GP may cause an
explosion.
vi
Preface
GP-377 Series User Guide