Table of Contents
Advertisement
1.3
Board Specifications
Table 1-1: Board Specifications
Features
Description
•
•
Processors
•
•
Chipset
•
•
Bus Interface
•
•
Expansion Slot
•
•
•
System Memory
•
•
Flash Memory
•
•
Storage
•
•
•
I/O
•
•
•
•
•
•
•
Board Specifications
•
•
•
•
•
•
•
•
•
•
BIOS Features
•
•
•
•
•
•
Dual socket Intel Xeon Processors from the SandyBridge-EP series E5-2600 processor family.
8cores 1.8GHz 70W
8cores 2.0GHz 95W
6cores 2.3GHz 95W
Patsburg-B C600 Series
Dual QPI 8GT/s between both CPUs
DMI Gen2 5GT/s from CPU to Chipset
1 Mid-size AdvancedMC bay with PCIe x8 Gen 2 connection
PCIe x8 Gen2 connection to RTM
Support of DDR3 1066 to 1600MHz with ECC
Standard voltage(1.5V) and low-voltage(1.35V) modules are supported
4 memory channnels per CPU with a single DIMM location per channel
Up to 8GB memory modules per socket for a total of 64GB (note: 16GB modules could be
supported in a near future for a total of 128G)
Two connectors for two optional eUSB (embedded USB) flash drive modules
Single SATA GEN1 (1.5Gb/s), GEN2 (3Gb/s) and GEN3 (6Gb/s) on the AMC storage interface.
Four SATA GEN1 (1.5Gb/s), GEN2 (3Gb/s), GEN3 (6Gb/s) and SAS 3Gb/s storage interfaces on
the RTM.
Dual SFP
Dual USB
RJ45 Serial Port
TPM mezzanine
Video debug port available on the RTM
PICMG3.0 R3.0(AdvancedTCA Base Specification)
PICMG3.1 R1.0 (Ethernet/Fiber Channel over AdvancedTCA)
AMC.0 R2.0 (Advanced Mezzanine Card Base Specification)
AMC.1 R2.0 types 1, 2, 4, 8 (Advanced Mezzanine Card PCI-Express)
AMC.3 R1.0 (Advanced Mezzanine Card Storage)
ACPI rev 2.0
HPM.1
IPMI 2.0
AMI UEFI with Compatibility Support Module for legacy option ROMs and Operating System
support
Save BIOS Configuration to SPI.
Boot from Ethernet PXE (Base and Fabric interfaces and management Lan)
Boot from Ethernet iSCSI (Fabric interfaces)
Boot from SAS/SATA; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk)
Diskless, Keyboard less, and battery less operation extensions
System, video and LAN BIOS shadowing
Robust BIOS flash Update with rollover capability (HPM.1)
Field updateable BIOS
Advanced Configuration and Power Interface (ACPI 2.0, 3.0 & 4.0)
Console redirection to serial port (VT100)with CMOS setup access, and SOL (Serial over LAN)
Event (correctable/uncorrectable ECC,PCIe, POST errors); log support to IPMC
3
Product Description
AT8060
www.kontron.com
Advertisement
Table of Contents
