Table of Contents
Advertisement
5.1.6.5.2
Lan channel 2 configuration sub-menu
Feature
Option
Lan channel 2
configuration
Disabled, Static,
Configuration source
Dynamic
BMC IP address
Subnet mask
Gateway IP address
BMC IP address
Subnet mask
Gateway IP address
BMC MAC address
VLAN Tagged Support
802.1q VLAN ID Value
802.1q VLAN Priority
Description
Subtitle
Display only if Dynamic
Display only if Dynamic
Display only if Dynamic
Display only
Numeric
Numeric
104
Software Setup
Help text
Select to configure LAN
channel parameters
statically or dynamically
(DHCP). Changes will be
applied on next reboot.
Enter BMC IP address.
Enter subnet mask.
Enter Gateway IP
address.
Enter BMC IP address.
Enter subnet mask.
Enter Gateway IP
address.
Enter BMC MAC address.
Select if VLAN Tagged
Packets are to be added
or not.
Enter VLAN ID value in
decimal. VLAN ID must
be between 1 and 4094.
Enter VLAN Priority
value in decimal. Proper
value below 8.
AT8060
www.kontron.com
Advertisement
Table of Contents
