Table of Contents
Advertisement
Feature
Option
Device power-up delay
Auto, Manual
Device power-up delay in
seconds
Mass Storage Devices:
Auto, Floppy, Forced
USB Device X
FDD, Hard Disk, CD-
ROM
5.1.4.9
COM Port Configuration sub-menu
Feature
Option
COM Port Configuration
COM Port Chip
COM Port A Configuration
COM Port B Configuration
Description
Numeric
Display only
Available on detected device
Description
Subtitle
Display only
Selects sub-menu.
Selects sub-menu.
83
Software Setup
Help text
Maximum time the
device will take before it
properly reports itself to
the Host Controller.
'Auto' uses default
value: for a Root port it
is 100 ms, for a Hub port
the delay is taken from
Hub descriptor.
Delay range is 1..40
seconds, in one second
increments
Mass storage device
emulation type. 'AUTO'
enumerates devices
according to their media
format. Optical drives
are emulated as
'CDROM', drives with no
media will be emulated
according to a drive
type.
Help text
COM Port Parameters.
Set Parameters of COM
port A
Set Parameters of COM
port B
AT8060
www.kontron.com
Advertisement
Table of Contents
