Table of Contents
Advertisement
Features
Description
•
•
•
•
IPMI Features
•
•
•
•
•
•
•
Supervisory
•
•
OS Compatibility
•
1- NEBS power mode: =<235W (210W front board and AMC + 25W RTM)
Power Requirements
2- High power mode: =< 350W
Operating: 0-55°C/32-131°F with 30CFM airflow
Environmental
Temperature*
Storage and Transit: -40 to +70°C/-40 to 158°F
Operating: 15% to 90% @55°C/131°F non-condensing
Environmental
Humidity*
Storage and Transit: 5% to 95% @ 40°C/104°F non-condensing
Operating: 4,000 m / 13,123 ft
Environmental Altitude*
Storage and Transit: 15,000 m / 49,212 ft
Operating: 3G each axis
Environmental Shock*
Storage and Transit: 18G each axis
Operating: 5-200Hz. 0.2G, each axis
Environmental
Storage and Transit: 5Hz to 20Hz @ 1 m2/s3 (0.01g2 /Hz) (flat)
Vibration*
•
Reliability
•
Meet or exceed:
Safety / EMC
•
•
Warranty
Two years limited warranty
* Designed to meet or exceed
Management Controller compliant IPMI v2.0.
Remote control capability (power on-off /clean shutdown/cold reset) via any IPMI channels
including LAN.
Full speed 115200 bps Serial Over LAN (+LAN access to BIOS menu setup) and IPMI Over LAN
(IPMI v2.0) always available.
Serial data caching and replay to ease software application troubleshooting and post mortem
analysis.
Bios Post Code errors are sent to the chassis manager's for System Event Logging.
Configurable automatic "clean ACPI shutdown" policy on disk storage deactivation (AMC or
RTM).
Standard PCIe Hot Plug operation embedded with PICMG AMC/RTM activation.
Robust IPMI firmware Update with rollover capability, without any payload impact (HPM.1).
Override configuration for activation of the board/AMC/RTM without Shelf Manager
Intervention.
Supports a system management interface (KCS interrupt driven) via an IPMI V2.0 compliant
controller.
Standard IPMI Watchdog for all CPU running phases (BIOS execution / OS loading and running).
IPMI Hardware system monitor (power/voltages), memory and all critical component's is
monitored.
Extensive sensor monitoring (around 100 IPMI sensors) and event generation based on
thresholds and discrete readings.
Validated with: Red Hat Enterprise Linux 5.5 and 6.1.
20Hz to 200Hz @ -3dB/oct (slope down)
Whole board protected by active breaker
USB voltage protected by active breaker
Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1
EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
4
Product Description
AT8060
www.kontron.com
Advertisement
Table of Contents
