Programming Example - RED Compact 24 Use And Installation Manual

red
It is the second of the four available programmes. The setting method
is the same as for the above programme.
Abbreviation on the
display (8)
Data to enter Switch-on
It is the third of the four available programmes. The setting method is
the same as for PROGRAMME 1.
Abbreviation on the
display (8)
Data to enter Switch-on
It is the last of the four available programmes. The setting method is
the same as for PROGRAMME 1.
TO EXIT THE PROGRAMMING SEQUENCE, PRESS BUTTON 3
AGAIN ONCE YOU HAVE REACHED STEP "UT 16".
IMPORTANT NOTE
The boiler takes 20 minutes to start up before sufficiently hot
air is released and another 10 minutes approximately before
it is running regularly. To adjust the switch-on time, please
take this time into consideration. Similarly, the boiler takes
approximately 30 minutes to shut down, during which time
the heat accumulated by the appliance is released into the
room. Take this time into consideration for considerable fuel
savings.

PROGRAMMING EXAMPLE

9.5.
Here is a complete programming example, where reference is made to
a weekly heating cycle in a home which is occupied full-time, by
occupants who come home for lunch and in the late afternoon.
During the week, the occupants want the heating to be on when they
wake up, during their lunch break and when they get in from work,
whereas on Saturdays and Sundays, the heating should always be on.
Programming and settings
COMPACT 24 BOILER
USE AND MAINTENANCE MANUAL
PROGRAMME 3
UT 11 UT 12
Switch-off
Time Time
PROGRAMME 4
UT 14 UT 15
Switch-off
Time Time
UT 13
Days ON or OFF
On/Off 1,2,3,4,5,6,7
UT 16
Days ON or OFF
On/Off 1,2,3,4,5,6,7
Technical dept. - All rights reserved - Reproduction prohibited
Chapter
9
43
page