Setting The Current Time; Adjusting The Water Temperature In The Boiler; Storing The Recipe In The Boiler - RED Compact 24 Use And Installation Manual

red

SETTING THE CURRENT TIME

9.1.1.
Press in quick sequence buttons
UT01
parameter . Press button
displays the hours. Use button
hour.
To confirm the chosen hour and move on to the minutes setting, press
 UT03
the button. (item
 
Use buttons or to decrease or increase the minutes, in steps of
+/- 1 minute.
To confirm the chosen time and complete the setting, press

Storing the recipe in the boiler.

9.1.2.
THE RECIPE SELECTION PROCEDURE IS ONLY
ENABLED WITH THE BOILER TURNED OFF.
Press in rapid sequence or simultaneously buttons
"SET" will be displayed alternately with the recipe number. The recipes
are +3;+2;+1;0;-1;-2;-3.
Otherwise, if the display shows "- - - -", this means no recipe is
currently selected (first start-up).
To quit the menu without making any changes, press the

the button or wait 120 seconds without pressing any buttons.
To modify or set a new recipe, press buttons
the desired recipe.
To confirm your choice, you must hold down the
button until the display shows the time and the word
"OFF".
The default boiler recipe is no. 0 for all versions and
for all Countries.
ADJUSTING THE WATER TEMPERATURE IN
9.2.
THE BOILER
The boiler is factory set with a series of standard parameters which
allow it to function correctly (water temperature of 65 °C and room
temperature of 22 °C) but if the user wants to change these
parameters, (s)he can do so as follows:
The parameters to be set are as follows:
Room T This is the temperature you wish to reach inside the
room where the boiler is installed. To adjust it, press
ONCE the
using button
T H O = Maximum
2
temperature is reached, the boiler diminishes its
performance
temperature set is 65 °C and it can be set to below 40 °C
or above 80 °C.
Programming and settings
COMPACT 24 BOILER
USE AND MAINTENANCE MANUAL
 
and

once to access item UT02 which
 
or to decrease or increase the
will be displayed)


or

"SET" button and change the values
 
or
boiler water temperature.
to avoid overheating.
to access technical


and .

button or

in order to find

When this
The standard
Technical dept. - All rights reserved - Reproduction prohibited
2
Ut 01
!
SET
day 1
1 6
2
Ut 02
!
SET
1 6:
1 6
2
Ut 03
!
SET
: 1 0
1 6
Sequence for accessing the hour and minutes
setting menu.
set
2
!
SET - - - -
1 6
First access to the recipe selection menu
set
2
!
+ 3
SET
1 6
Phase 1: Example of entering the recipe menu
and displaying the previous setting
set
+ 3
Phase 2: To choose the desired recipe, press
the buttons shown
2
AM B
!
SET
22°C
1 6
Setting the room temperature
2
H2O
!
SET
70°C
1 6
Setting the system water temperature
Chapter
9
33
page
3
5
4
TURBO
3
5
4
TURBO
3
5
4
TURBO
3
5
4
TURBO
3
5
4
TURBO
3
5
4
TURBO
3
5
4
TURBO