Packaging - RED Compact 24 Use And Installation Manual

red

Packaging

4.2.
The boiler is delivered complete with all electrical and mechanical components and it is factory tested.
Open the package, remove the three screws from the front bracket and the other three from the rear bracket;
these brackets secure the boiler to the pallet (fig.1).
The materials making up the packaging are neither toxic nor harmful, and so require no particular disposal
measures.
Storage, disposal or any recycling is therefore under the responsibility of the end user in compliance with the
applicable laws in force.
Figure 1 - Removing the packaging screws
The boiler must always be handled vertically, using manual or mechanical cranes, which can lift the pallet on
which it is packaged or the boiler itself directly. The boiler - as illustrated in figure 2 - comes with a hook to make
all handling easier.
Take special care not to damage electrical or mechanical parts, with shocks or water sprays once the protective
packaging has been removed.
 After removing the packaging, make sure the boiler is complete and undamaged
 If in doubt, contact the retailer
 The document envelope contains:
System manual
An instruction manual for installation, use and maintenance
Appendix G - Technical inspection report for heating system with an output of less than 35 kW
Guarantee
Installation
COMPACT 24 BOILER
USE AND MAINTENANCE MANUAL
Technical dept. - All rights reserved - Reproduction prohibited
Figure 2 – Handling hook
Chapter
4
14
page