ASYS
16 A Transfer System
1.
C
ERTIfICATE AND CONDITIONS Of WARRANTy
The warranty conditions are stipulated in the sales contract. If not the following
points shall apply:
SOCOMEC's guarantee is strictly limited to the product(s) and does apply neither to
the equipment in which they could be integrated nor to the performance of such
equipment.
The manufacturer, at his discretion, is entitled to adapt his product in order to com-
ply with the warranty or replace the faulty parts. The manufacturer's warranty does
not apply in the following cases:
- Defects arising either from designs or parts imposed or supplied by the Purchaser,
- Failure due to fortuitous circumstances or force majeure,
- Replacements or repairs resulting from normal wear of units and machinery,
- Repair, modification, regulation or replacement of parts made by a third party or
personnel not qualified without SOCOMEC's written consent.
The period of validity of the warranty may never exceed 12 months after delivery.
Replacements, repairs or modifications of parts during the warranty period cannot
extend the duration of the warranty.
For these stipulations to be valid, the Purchaser must, within a maximum of 8 days
after the warranty lapses, expressly inform the Manufacturer of the faulty design,
or the material or manufacturing defect, stating in detail the grounds for his com-
plaint.
Defective parts replaced free of charge by the Manufacturer are to be put at his dis-
posal, so that he may become the sole owner.
The warranty legally ceases if the Purchaser has, of his own initiative, undertaken
modifications or repairs on the Manufacturer's products without the written consent
of the latter.
The Manufacturer's liability is limited to the obligations as defined herein (repair or
replacement), all other items of damage being formally excluded.
The Purchaser is liable for taxes or duties of any kind in compliance with either the
European regulations, or those of the country of import or transit.
2
IOMASY160810-GB_00
Need help?
Do you have a question about the Asys 16 A Transfer System and is the answer not in the manual?