Intended Use; Device Overview - socomec Asys 16 A Transfer System Installation And Operating Manual

The ASYS TRANSFER SWITCH device is used as a power source selector providing a
redundant power supply to the load.
It runs on a single phase network. The device is compliant with all relevant safety
regulations concerning information technology equipment, including electronic
equipment for use in an office environment.
This document provides important instructions for a safe installation, operation and
use of the ASYS.
It is advised that this User Manual be consulted before installation of the equipment,
which operation should only be performed by skilled personnel.
The ASYS is available in two voltage levels, 120 Vac and 220/230/240 Vac.
The nominal current 16A is available for both voltage levels.
Please strictly follow the procedures when switching the ASYS ON
or OFF. In all circumstances all repairs must only be executed by au-
thorized and skilled personnel.
This equipment complies with the European Community directives for professional
equipment. Hence it is labelled as follows:

INTENDED USE

WARNING

DEVICE OVERVIEW

.
ASYS
16 A Transfer System
IOMASY160810-GB_00