5.
FRANKING YOUR MAIL
5.1 Introduction
In the event that a satisfactory print cannot be achieved due to bulky
contents (Max.10mm) the envelope should be treated as a packet
and a label used.
It is recommended that the IJ-35/40/50 is left powered on at all
times. This will assist in maintaining print quality. In the event
that you have to power the machine down, first press
to allow
the machine to return to standby mode, then WAIT for
approximately ONE MINUTE to allow the ink cartridge to return to
the park position before removing the power.
Franking your mail
31
4127759Y/C
01/02/2006
IJ40-0006-31/B