Printing With External Printer - Neopost IJ-35 User Manual

If after a short wait, you are returned to the register screen your
method of print may be set to External Printer, please refer to
Printing with External Printer below.
Press
To return to Ready Mode press

11.3 Printing with External Printer

Before proceeding to print registers using an external printer
ensure that the printer lead is connected to the Upper Accessory
Port at the back of the machine, (please refer to Controls and
Features) and that the printer power lead is connected to an
adjacent power outlet.
Set the printer to ON and the status to ONLINE.
From your selected registers screen press
period of time, you will be returned to the screen and the register
data will have been printed.
If the registers screen does not re-appear after a few seconds and
the printer does not print, re-check all printer connections and
ensure that the printer status is set to ONLINE.
4127759Y/C
01/02/2006
The method of print (Label or External Printer) is set in
Supervisor Mode, please refer to "Reports".
to return to the REGISTERS screen.
64 Meter registers
three times.
IJ40-0006-64/B
, after a short