Chapter 6
Mounting Instructions
Step 6
Position the mounting bracket over the partition wall and adjust it to fit. See
Figure 6-8
Using the Desktop Holster
Follow these steps to mount the access point on a desktop or other horizontal surface using the supplied
desktop holster.
Step 1
Select a suitable location to place the holster.
Connect the Ethernet and power cables.
Step 2
•
Position the holster so that its back side is facing you.
Step 3
OL-4309-02
Cubicle Wall Bracket
If you are going to secure the access point with a Kensington lock, attach it now.
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
Using the Desktop Holster
Figure
6-8.
6-9