Reset Connection - CipherLab 1564 User Manual

BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported —
No. Keyboard Type
64 PCAT (US)
65 PCAT (French)
66 PCAT (German)
67 PCAT (Italy)
68 PCAT (Swedish)
69 PCAT (Norwegian)
70 PCAT (UK)

2.1.2 RESET CONNECTION

For BT HID, you can only have the scanner connected to one computer at a time. If you
want to connect the scanner to another host, you must have it read the "Reset
Connection" barcode so that the current connection record will be cleared. Then, the
scanner will restart itself automatically. Go through the whole process in
Dongle to establish a new connection.
Note: The "Restore System Defaults" barcode will have the current connection record
cleared as well.
Chapter 2
No. Keyboard Type
71 PCAT (Belgium)
72 PCAT (Spanish)
73 PCAT (Portuguese)
74 PS55 A01-2 (Japanese)
75 User-defined table
76 PCAT (Turkish)
Reset Connection
Update
Selecting Output Interface
3.2.3 Connect to
51