Transmittal Priorities - Fire-Lite MS-9050UD Manual
Addressable fire alarm control panel
Hide thumbs
Also See for MS-9050UD:
- Operating instructions (1 page) ,
- Wiring diagram (1 page) ,
- User manual (216 pages)
Table of Contents
Advertisement
Transmittal Priorities
5.1 Transmittal Priorities
The integral communicator transmits highest priority events first. Events, in terms of priority, are
listed below in descending order:
1.
Alarms (highest priority level)
Pull stations
Waterflow
Smoke detector
Other alarm types
2.
Supervisory Zone
3.
System Troubles
Zone disabled
Fire drill
AC fail (after delay)
Zonal faults
Earth fault
Low battery
Telephone line fault
Notification Appliance Circuits fault
Communication trouble
Annunciator trouble
System off normal
4.
Restoral Reports
Zone alarm
Supervisory
Zone(s) enabled
Fire drill
AC
Zone fault
Earth
Battery
Telephone line
Notification Appliance Circuits
Communication
Annunciator trouble
System off normal
5.
24 Hour Test (lowest priority)
Red LEDs are provided on the circuit board to identify which telephone line is activated. Also, a
green LED labeled Kissoff will turn on whenever the control panel has successfully transmitted
reports to the Central Station. The Kissoff LED may turn on several times during communications
with a Central Station.
MS-9050 Series Manual — P/N 52413:F 10/22/2010
Central Station Communications
175
Advertisement
Table of Contents
