Table of Contents
Advertisement
5.13.2 D
C
IRECT
ONNECT WITH AN
• Place the LCD in IDLE mode and the telephone in voice mode (pull the exclusion key button up).
Wait for a dial tone.
• Dial the number of the remote site.
• The remote modem answers with a 2100-Hz answer tone. If the remote modem does not answer,
hang up and return to the first step.
• When the answer back tone is heard, place the telephone in data mode (push the exclusion key
button down).
• The originating modem goes off hook and normal operation begins within 30 seconds. If a successful
connection is not established, return to the first step.
5.13.3 A
F
UTODIAL
ROM
• Advance the LCD to #6 on the main menu, DIAL STORED NUMBER.
• Select the number to dial and press YES to dial. Operation begins in 30 seconds. If not, press the
TALK/DATA button and return to the first step.
5.13.4 A
UTODIAL WITH THE
• To dial a number—for example, 555-1212—type AT D 555-1212 and a carriage return.
• To dial a stored number type ATD Sn (n=1-9) and a carriage return.
• The modem dials the number—either pulse or tone, whichever is currently in effect—and takes the
role of the originate modem.
Refer to
Section 6.7
5.14 Answering a Call
5.14.1 A
UTOANSWER
Autoanswer by the modem is the normal configuration. Pressing TALK/DATA switches between IDLE
and TALK. The modem will answer an incoming call in either mode. If TALK is selected, a telephone
plugged into the telset jack will also ring.
V.32 9600 or
IDLE
5.14.2 M
A
ANUAL
NSWER
On ring detection the modem front panel displays:
V.32 9600
RINGING
Press TALK/DATA to answer the call or enter the ATA command at the DTE.
E
XCLUSION
F
P
RONT
ANEL
AT C
S
OMMAND
for additional dialing commands.
V.32 9600
TALK
-K
T
EY
ELEPHONE
ET
CHAPTER 5: Operation
4 9
Advertisement
Table of Contents
