Disregard Incoming Call (Dic); Connect Incoming Call (Cic); Redial Last Number - Black Box 325 User Manual

MODEM 325 AND MODEM 325 CARD
If no number is stored at the specified address, nothing is returned for that address. The separator
{sep} is a
<etb><sy><sy><stx>LSN<sp>
sequence for BISYNC format (the last LSN string terminates with <etx> per V.25 bis. For synchronous
bit-oriented operation, each LSN string is treated as an individual message per V.25 bis.
All stored numbers are sent to the DTE as
LSN<sp> {sep}
a;nn...n
where is the stored number address;
a
8.4.6 D I
ISREGARD NCOMING
The command for disregarding an incoming call does not require parameters. If no call is incoming, the
command is ignored.
Responses:
VAL Valid command received. Transmitted on receiving an error-free command with no
transmission error such as a parity error. This confirmation is sent before the command
is executed.
INVCU Invalid command—command unknown.
Example: TIC
INVMS Invalid command—message syntax error.
Example: DIC;
8.4.7 C I
ONNECT NCOMING
No parameters are required. If there is an incoming call, the modem immediately answers the call. If no
call is incoming, the command is ignored.
Responses:
VAL Valid command received. Transmitted on receiving an error-free command with no
transmission error such as a parity error. This confirmation is sent before the command
is executed.
INVCU Invalid command—command unknown.
Example: TIC
INVMS Invalid command—message syntax error.
Example: CIC;
8.4.8 R L N
EDIAL AST UMBER
The CRR command redials the last number a maximum of
n
modem redials once. Also, the maximum number of redials, the amount of time between redials, and
other parameters may vary depending on application and national requirements if outside the U. S.
Responses:
Same as for the CRS command.
124
a;nn...n...
nn....n
C (DIC)
ALL
C (CIC)
ALL
(CRR )
N
is the number stored.
times. If no parameters are present, the
n